Construction

Work Safely on Roofs

Nationally recognised unit of competency

CPCPCM2055A 

This unit of competency specifies the outcomes required to perform safe work practices when undertaking plumbing work on roofing structures.

Costs

  • Member Cost: $0.00
  • Associated Member Cost: $285.00
  • Non Member Cost: $380.00

Cancellation Policy:

  • PPTEU Members: $100 fee will apply if you do not attend training on the day or cancel within 4 days of course commencement.
  • All other students: there is no refund if you do not attend training on the day or cancel within 4 days of course commencement.

Please refer to the polices section to download Learner's Handbook and Policies.

Prerequisites

CPCPCM2043A - Carry out WHS requirements.  

Apprentices enrolling into this course must provide a Statement of Attainment or Testamur from your trade school showing you have completed unit CPCPCM2043A Carry out WHS requirements. If you do not have this unit you will receive a statement of attendance only until you provide the required document.

If you are not an apprentice and do not have the required unit you will be enrolled into unit CPCPCM2043A - Carry out WHS requirements.   Please contact Ceputec regarding the online modules of this training.

Duration

8 hours - 1 days.  All courses are delivered face to face in a classroom and in a practical area.  The location is either at PICAC facilities or at a specified work location which will be confirmed in the confirmation email.

Certification

Participants who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Ceputec (RTO 4612).

National unit of competency

CPCPCM2055A - Work safely on roofs

Course Structure

Site location for work application may be either domestic or commercial and may be a new work site or an existing structure being renovated, extended, restored or maintained.

Required Skills

Required skills for this unit are:

  • communication skills to:
    • access information
    • determine requirements
    • enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand
    • follow instructions
  • read and interpret:
    • documentation from a variety of sources
    • drawings and specifications
    • report faults
    • use language and concepts appropriate to cultural differences
    • use and interpret non-verbal communication, such as hand signals
  • written skills to:
    • complete workplace documentation
    • document scope of work and work practices
    • conducting a safety assessment of a roof work site
    • identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials
    • numeracy skills to apply measurements and calculations
    • organisational skills, including the ability to plan and set out work
    • providing necessary safety measures, including the installation of a roof safety system
  • technological skills to:
    • access and understand site-specific instructions in a variety of media
    • use mobile communication technology.

Assessment

A person who demonstrates competency in this unit must be able to provide evidence of:

  • locating, interpreting and applying relevant information, standards and specifications for working safely on roofs
  • applying safety requirements throughout the work sequence, including the use of personal protective clothing and equipment
  • as a minimum the ability to, given the plans and specifications, for the roof working area of a corner, extending at least 4 metres in either direction and greater than 1.8m high, provide for erection, maintenance and dismantling of the fall and perimeter protection requirements for the site, incorporating handrails and footwalk or harnesses and harness fixing points for safe personal and stores access to the roof, stores and equipment locations; and risk assessment, ensuring:
  • correct identification of risks and safety requirements
  • correct selection and use of appropriate processes, tools and equipment
  • completing all work to specification
  • compliance with regulations, standards and organisational quality procedures and processes
  • communicating and working effectively and safely with others.

Participants Requirements

  • PPE: Safety boots, hi vis shirt/vest, we recommend long pants
  • Can bring own harness if available.  If student does not have own harness Ceputec will provide one for purpose of training.
Enrol
Work safely on roofs Work safely on roofs

Enter and work in confined spaces

Nationally recognised units of competency

RIIWHS202D / MSMWHS216 / HLTAID001 

This course comprises of  the following units:

  • RIIWHS202D which describes a participant's skills and knowledge required to enter and work in confined spaces in the Resources and Infrastructure Industries.  This unit is appropriate for those working in operational roles undertaking work in confined spaces.
  • MSMWHS216 which covers the skills and knowledge required to operate and maintain breathing apparatus and equipment in a irrespirable atmosphere, as defined by the Australian standard AS/NZS 1715:2009 Selection, use and maintenance of respiratory protective equipment. 
  • HLTAID001 skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) guidelines.

Costs

  • Member Cost: $0.00
  • Associated Member Cost: $330.00
  • Non Member Cost: $440.00

Cancellation Policy:

  • PPTEU Members: $100 fee will apply if you do not attend training on the day or cancel within 4 days of course commencement.
  • All other students: there is no refund if you do not attend training on the day or cancel within 4 days of course commencement.

Please refer to the polices section to download Learner's Handbook and Policies.

Prerequisites

There are no formal pre-requisite entry requirements necessary for these units of competency. However, a solid understanding and grounding in workplace health and safety is essential for this delivery strategy and experience of working in confined spaces under supervision

Duration

16 hours - 2 days.  All courses are delivered face to face in a classroom and in a practical area.  The location is either at PICAC facilities or at a specified work location which will be confirmed in the confirmation email.

Certification

Participants who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Ceputec (RTO 4612).

National units of competency

  • RIIWHS202D - Enter and work in confined spaces
  • MSMWHS216 - Operate breathing apparatus
  • HLTAID001 - Provide cardiopulmonary resuscitation

Course Structure

The structure of the course is based on 16 hours comprising of classroom training activities and practical activities to assist learner's development. These are supplemented by self study work the learner is encouraged to complete to enhance their understanding.

Required Skills

Evidence must be provided that demonstrates knowledge of:

  • Procedures for performing CPR
  • Use of an AED
  • locates and applies relevant documentation, policies and procedures
  • demonstrates completion of entering and working in confined spaces that safely, effectively and efficiently meets all the required outcomes on more than one (1) occasion including:
    • obtain appropriate entry permit and instructions for performing work in confined space
    • interpreting and applying safe work method statements
    • apply tagging and lock out
    • selecting, wearing and caring for personal protective equipment applicable to all tasks and environment identified
    • entering the confined space
    • using atmospheric monitoring devices prior to entering the confined space
    • working in the confined space
    • using atmospheric monitoring devices during confined space activity
    • applying safe materials handling methods
    • exiting the confined space
    • remove tagging and lock out
  • the effects of irrespirable atmospheres on the body and the need for protective equipment
  • characteristics, component parts, operation of compressed air breathing apparatus
  • operational testing, standard operating procedures (SOPs) and safe work practices when wearing breathing apparatus
  • use of procedures, personal lines and tallies
  • pre-use tests and checks
  • breathing apparatus control
  • entrapment procedures
  • communications while wearing breathing apparatus.

Assessment

HLTAID001 - the candidate must demonstrate competence in provide cardiopulmonary resuscitation by:

  • Performing CPR on an adult manikin for 2 minutes uninterrupted and a child manikin for 2 minutes uninterrupted.
  • Participating in a first aid scenario involving the use of an AED.
  • Completing a casualty report.
  • Completing a theory assessment.

RIIWHS202D - the candidate must demonstrate knowledge of enter and work in confined spaces through:

  • identifying areas that constitute confined spaces
  • complying with site and equipment safety requirements
  • complying with the entry and exit procedures, risks and regulations
  • types of air contaminants and toxic gases
  • identifying the limitations of breathing apparatus
  • identifying equipment types, characteristics, technical capabilities and limitations
  • complying with site isolation and site control responsibilities and authorities
  • locations of safety data sheets (SDS) information and application
  • using confined space and Industry terminology

MSMWHS216 - competency must be achieved before performing this work unsupervised. Therefore this unit will typically be assessed off the job. Where assessment is undertaken on the job appropriate supervision and safety precautions must be provided.

  • The unit should be assessed holistically and the judgement of competence based on a holistic assessment of the evidence.
  • The collection of performance evidence:
    • should provide evidence of the ability to perform over the range of situations which might be expected to be encountered, including typical disruptions to normal, smooth work conditions
    • must include the use of breathing apparatus, appropriate tools, equipment and safety gear requiring demonstration of preparation, operation, completion and responding to problems
    • may use industry-based simulation particularly where safety, lack of opportunity or significant cost is an issue.
  • Off-the-job assessment must sufficiently reflect realistic operational workplace conditions that cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
  • Assessment in a simulated environment should use evidence collected from one or more of:
    • walk-through
    • demonstration of skills
    • industry-based case studies/scenarios
    • ‘what ifs’.
  • Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept).
  • Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
  • Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
  • The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed.
  • Foundation skills are integral to competent performance of the unit and should not be assessed separately.
  • As a minimum, assessors must satisfy the Standards for Registered Training Organisations 2015 assessor requirements.

Participants Requirements

PPE: safety boots, hi vis shirt/vest and hard hat
Bring their own harness and breathing apparatus if they have one.
All CPR must be carried out on the floor.

Enrol
Enter and Work in Confined Space Enter and Work in Confined Space

Work Safely at Heights

Nationally recognised unit of competency

RIIWHS204D - Work safely at heights

This unit describes a participant’s skills and knowledge required to work safely at heights in the Resources and Infrastructure Industries.  This unit is appropriate for those working in operational roles where they are required to perform work at heights.

Costs

  • Member Cost: $0.00
  • Associated Member Cost: $285.00
  • Non Member Cost: $380.00

Cancellation Policy:

  • PPTEU Members: $100 fee will apply if you do not attend training on the day or cancel within 4 days of course commencement.
  • All other students: there is no refund if you do not attend training on the day or cancel within 4 days of course commencement.

Please refer to the polices section to download Learner's Handbook and Policies.

Prerequisites

This unit has no prerequisites

Duration

8 hours - 1 day.  All courses are delivered face to face in a classroom and in a practical area.  The location is either at PICAC facilities or at a specified work location which will be confirmed in the confirmation email.

Certification

Participants who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Ceputec (RTO 4612).

National unit of competency

  • RIIWHS204D - Work safely at heights

Course Structure

Site location for work application may be either domestic or commercial and may be a new work site or an existing structure being renovated, extended, restored or maintained. 

Required Skills

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

  • locates and applies relevant documentation, policies and procedures
  • demonstrates completion of working safely at heights that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
    • accessing, interpreting and applying technical and safety information for working at heights
    • assessing hazards and risk associated with working at heights and implement control methods
    • selecting wearing and caring for personal protective equipment
    • identifying required safety systems including fall protection and associated equipment
    • checking that fitting, adjusting and anchoring of fall protection and associated equipment is correct
    • performing work safely at heights

The candidate must demonstrate knowledge of the following when working safely at heights:

  • names and functions of equipment, components and materials
  • complying with equipment manufacturer’s instructions and specifications
  • safe shifting and handling of tools and materials
  • adhering to statutory and regulatory authority requirements
  • the nature of work undertaken at heights
  • complying with heights safety systems
  • the processes of providing for safe working practices
  • using safety equipment/systems and considerations to facilitate working safely at heights
  • complying with safe work methods

Assessment

A person who demonstrates competency in this unit must be able to provide evidence of:

  • locating, interpreting and applying relevant information, standards and specifications for working at heights
  • applying safety requirements throughout the work sequence, including the use of personal protective clothing and equipment
  • correct identification of risks and safety requirements
  • correct selection and use of appropriate processes, tools and equipment
  • completing all work to specification
  • compliance with regulations, standards and organisational quality procedures and processes
  • communicating and working effectively and safely with others

Participants Requirements

  • PPE: Safety boots, hard hat, hi vis shirt/vest,  We recommend long pants
  • Students may bring their own harnesses if available
Enrol
Work safely at heights Work safely at heights

Confined Space Refresher Course

Nationally recognised units of competency

RIIWHS202D / MSMWHS216 / HLTAID001 

This nationally recognised training is designed for those that already hold qualifications in Enter and work in confined space and Operate breathing apparatus but are required to recertify as a part of their employment or to work on a specific job or work site.  This course Includes CPR.

Costs

  • Member Cost: $0.00
  • Associated Member Cost: $165.00
  • Non Member Cost: $220.00

Cancellation Policy:

  • PPTEU Members: $100 fee will apply if you do not attend training on the day or cancel within 4 days of course commencement.
  • All other students: there is no refund if you do not attend training on the day or cancel within 4 days of course commencement.

Please refer to the polices section to download Learner's Handbook and Policies.

Prerequisites

Must have completed the following units:

  • RIIWHS202D - Enter and work in confined spaces
  • MSMWHS216 - Operate breathing apparatus

Duration

1 day.  All courses are delivered face to face in a classroom and in a practical area.  The location is either at PICAC facilities or at a specified work location which will be confirmed in the confirmation email.

Certification

Participants who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Ceputec (RTO 4612).

National units of competency

  • RIIWHS202D - Enter and work in confined spaces
  • MSMWHS216 - Operate breathing apparatus
  • HLTAID001 - Provide cardiopulmonary resuscitation

Participants Requirements

PPE: Safety boots, hard hat, hi vis shirt/vest.  We recommend long pants
Bring their own harness and breathing apparatus if they have one.
All CPR must be carried out on the floor.

Enrol